★★★★★
● Verified
Truly couldn’t have had a better experience
Truly couldn’t have had a better experience, I am so thankful for the service, conversations and final result.
Trustpilot customer
Crytec ATV150 Flail Mower 15Hp Power Mower
£1,326.50
Skip to product information
Crytec ATV150 Flail Mower 15Hp Power Mower
£1,326.50
Taxes included.
Shipping calculated at checkout.
*Photo is of the smaller 120 Flail Mower
The Crytec AT-150 ATV Flail Mower is a heavy-duty machine designed for paddock maintenance, field management and woodland clearance. Powered by a 15HP Loncin 420cc four-stroke petrol engine, it tackles thick grass, docks, nettles, thistles, bracken and overgrown brambles with ease.
Featuring a 1500mm cutting width and 28 heavy-duty hammer flails, the AT-150 is ideal for maintaining paddocks, clearing overgrown areas and cutting back heather and small saplings. With adjustable cutting height, a belt-driven system and a swivel hitch, it offers reliable performance for demanding outdoor tasks.
Key Features & Specifications
-
Engine: Loncin 420cc, 15HP four-stroke petrol
-
Cutting Width: 1500mm
-
Blades: 28 hammer flails (4 banks of 7)
-
Cutting Height: Adjustable from 50mm to 150mm
-
Drive System: Belt driven
-
Hitch: Swivel hitch
-
Tyres: 16 x 7.5 x 8 inches
-
Starting System: Recoil start
-
Maximum Engine Speed: 3600 RPM
-
Warranty: 2-year parts warranty
Delivery & Assembly
The mower is delivered on a wooden pallet within a protective steel frame and arrives approximately 90% assembled. Allow around 30–50 minutes for final assembly. An instruction manual is included.
Please note: An angle grinder is required to cut the centre and top bars of the steel frame to release the mower.
Important Information
-
Engine oil: Approximately 1 litre of 10W-40 or 15W-40 oil is required. Check the oil on level ground, following the engine manual, as the Loncin engine has a sensitive low-oil sensor.
-
Greasing: Grease the mower before first use and after every use.
-
Pre-use checks: Check all fixings and components before operating.
-
Belt care: Match your mowing speed to the conditions to avoid overloading the machine and damaging the drive belts.
As for the engine, please fill on level ground until oil overflows as Loncin engines have a very sensitive oil sensor. Checks must be done all round prior to use, Any help required please contact our workshop.
The Mower is delivered on a steel framed Pallet 90% assembled . You should allow approx. 30 to 50 min for final assembly .The manual for the mower will that come with your mower.
You will need approx. 1 litre of engine oil for the engine. For this purpose we recommend multi-grade oil of classification 10W40 or 15W40, Please make sure you grease your new mower prior to use, then after each time you use the mower. Please watch mowing speed otherwise you will burn belts, this is a common problem for new users.
Please note the mower comes in a steel frame, you will need a small grinder to cut the 2 centre bars and top bar out, this will allow you to free the mower and pull out on its wheels once off the wooden pallet that we put under the steel frame has been removed.
