★★★★★
● Verified
Truly couldn’t have had a better experience
Truly couldn’t have had a better experience, I am so thankful for the service, conversations and final result.
Trustpilot customer
72 in Orchard Finish Mower, 3 Point Hitch Cat.1, Hydraulic Offset, PTO Shaft Included with Shear Bolt, 25-50 HP, FMS72
£2,379.30
Skip to product information
72 in Orchard Finish Mower, 3 Point Hitch Cat.1, Hydraulic Offset, PTO Shaft Included with Shear Bolt, 25-50 HP, FMS72
£2,379.30
Taxes included.
Shipping calculated at checkout.
| Working Width | 72 in | Pulley Bearing | NSK Bearing |
| Overall Dimensions (L×W×H) | 94.2 x 75.7 x 31.4 in | Drive Type | Belt Driven |
| Cutting Height | 0.4-3 in | Number Of Belts | 3 |
| Max. Cutting Diameter | Depends On The Type Of Grass | Wheel Type | Pneumatic Wheel, Tubeless, 4PR |
| Offset Capability | Hydraulic Offset, 13.7 in Left / Right from Center | Side Disc Mower Diameter | 25.2 in |
| Number of Rotors | 4 | PTO Shaft Included | Yes |
| Number of Blades | 8 | PTO Shaft | Series 4 PTO Shaft with Shear Bolt, 1-3/8" × 6-Spline (Both Ends) |
| Blade Arrangement | 2 Blades per Rotor | Tractor PTO Speed | 540 RPM |
| Blade Type | Heat-Treated 60Si2Mn Steel | Recommended PTO HP | 25-50 HP |
| Blade Size | 2.36 x 7.13 x 0.9 in | 3 Point Hitch | Cat.1 |
| Blade Speed @ 540 PTO RPM | 2696 RPM | Quick Hitch Compatibility | Cat.1 Quick Hitch Compatible |
| Main Gearbox | Cast Iron Oil-Bath Gearbox, Gear Ratio 1:2.83 | Packing Size (L×W×H) | 77 x 47 x 26 in |
| Gearbox Lubrication | SAE 80W-90, Approx. 0.5L (0.53 qt) NOTE: SHIPPED WITHOUT OIL. |
Weight (N.W/G.W.) | 741/871 lbs |
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soot, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
